Inhibition effect of butan-1-ol on the corrosion behavior of austenitic stainless steel (Type 304) in dilute sulfuric acid

The electrochemical behavior of austenitic stainless steel (Type 304) in 3 M sulfuric acid with 3.5% recrystallized sodium chloride at specific concentrations of butan-1-ol was investigated with the aid of potentiodynamic polarization, open circuit measurement and weight loss technique. Butan-1-ol effectively inhibited the steel corrosion with a maximum inhibition efficiency of 78.7% from weight-loss analysis and 80.9% from potentiodynamic polarization test at highest concentration studied. Adsorption of the compound obeyed the Freundlich isotherm. Thermodynamic calculations reveal physiochemical interactions and spontaneous adsorption mechanism. Surface characterizations showed the absence of corrosion products and topographic modifications of the steel. Statistical analysis depicts the overwhelming influence and statistical significance of inhibitor concentration on the inhibition performance.     

Insight into shear‐induced modification for improving processability of polymers: Effect of shear rate on the evolution of entanglement state

Many experimental results have revealed that the re‐entanglement kinetics of disentangled polymers is much slower than that predicted by tube theory. This retarded recovery of fully entangled state is of practical significance that shear‐induced modification may offer a way to improve processability for a polymer by reducing viscosity. This work tried to figure out the shear‐rate dependence variation of viscosity in the view of evolution of entanglement state through disentanglement and re‐entanglement, aiming to provide fundamental insights into application prospect of shear‐induced modification in preparing “in‐pellet” disentangled polymers prior to final processing. High‐density polyethylene was sheared on a parallel‐plate rotational rheometer with a linearly increased shear rate. Results showed that higher shear rate could induce further disentanglement, resulting in a lower viscosity with a reduction rate up to 93.7%, larger molecular weight between entanglements M_e , and longer re‐entanglement time. Additionally, less entanglement would give a larger lamellar thickness of sheared samples after nonisothermal crystallization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 598–606     

Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

Et2Zn-mediated stoichiometric C(sp)-H silylation of 1-alkynes and chlorosilanes

A first example of an Et₂Zn mediated silylation of 1-aklynes is reported. A series of functional groups are tolerated in this reaction. Mechanistic studies support Zn alkynilides as intermediates in the reaction. This reaction protocol provides a practical method for the preparation of alkynylsilanes and expands the application of organometallic zinc in organic synthesis.     

“Four-component” assembly of polyaromatic 4H-cyclopenta[b]thiophene structures based on GaCl3-promoted reaction of styrylmalonates with 5-phenylthiophene-2-carbaldehyde

New “four-component” self-assembly of polyaromatic thiophene structures based on styrylmalonates and 5-phenylthiophene-2-carbaldehyde has been developed. This process is promoted by GaCl₃ and involves two [2?+?3]-annulation steps on the CHO-groups and para-substitution into one Ph-ring. The main feature of discovered process is a high diastereoselectivity with a significant increase in molecular complexity. The resulting polyaromatic structures containing two thiophene moieties in each structure have intense color and strong absorption in a near UV spectral region with absorption maxima in the range of 257–360?nm.     

A New Approach for Synthesis of Low‐moisture Glycidyl Azide Polymer

In this work, low‐moisture glycidyl azide polymer (GAP) was successfully prepared using a modified two‐step method. The modified method resembles the structure of the classical two‐step method, which is widely used to prepare the GAP. Firstly, epichlorohydrin (ECH) is polymerized into polyepicholorohydrin (PECH), which is subjected afterward to azidation step using sodium azide (NaN₃). Interestingly, minimizing the water content in the final GAP product, which is a challenging when dealing with GAP as a rocket propellant binder, was effectively achieved by utilizing low boiling point solvents instead of the relatively high boiling point Dimethyl formamide (DMF), monitoring the volatility of ECH and controlling the exothermicity of the reaction. Prepared GAP samples were investigated using Fourier transformer infra‐red (FT‐IR), gel‐permeation chromatography (GPC) and elemental analysis apparatus (CHNS) were used to characterize the product. The moisture % in the final product was examined using the Karl‐Fisher Technique. Results showed the successful preparation of GAP with low water content (<0.01 %), high average molecular weight (> 2000 g · mol^–1), 42.82 % nitrogen, a viscosity of 3484 cP at 20 °C, yield ranges between 95–98 % and a polydispersity index of 1.2. The prepared GAP is promising for replacement of the classical GAPs in the energetic materials applications.     

NUMERICAL SIMULATION OF FIBROBLAST DUROTAXIS MIGRATION INDUCED BY STIFFNESS GRADIENT OF SUBSTRATE1)

建立了一种细胞趋硬性迁移的理论模型和有限元分析框架,为连续变刚度人工基质的试验设计提供理论依据。考虑了细胞体的黏弹性属性,以及细胞与基质间的配受体动态反应过程,并以配受体合成时间为时间步长,将细胞运动方程化为静力学形式进行求解。对有限元过程提出一种动约束,便于消除其结构矩阵的奇异性。结果表明,模型能够模拟黏着斑内部力的快速波动现象,细胞的运动速度与观测数据一致,可有效模拟20,h以上的长时程问题。     

Unveiling the Layer‐Dependent Catalytic Activity of PtSe2 Atomic Crystals for the Hydrogen Evolution Reaction

Two‐dimensional (2D) PtSe₂ shows the most prominent layer‐dependent electrical properties among various 2D materials and high catalytic activity for hydrogen evolution reaction (HER), and therefore, it is an ideal material for exploring the structure–activity correlations in 2D systems. Here, starting with the synthesis of single‐crystalline 2D PtSe₂ with a controlled number of layers and probing the HER catalytic activity of individual flakes in micro electrochemical cells, we investigated the layer‐dependent HER catalytic activity of 2D PtSe₂ from both theoretical and experimental perspectives. We clearly demonstrated how the number of layers affects the number of active sites, the electronic structures, and electrical properties of 2D PtSe₂ flakes and thus alters their catalytic performance for HER. Our results also highlight the importance of efficient electron transfer in achieving optimum activity for ultrathin electrocatalysts. Our studies greatly enrich our understanding of the structure–activity correlations for 2D catalysts and provide new insight for the design and synthesis of ultrathin catalysts with high activity.     

Characterization of new Pt(IV)–thiazole complexes: Analytical,spectral, molecular modeling and molecular docking studies and applications in two opposing pathways

New thiazole derivatives were synthesized and fully characterized, then coordinated with PtCl₄ salt. Also, the newly synthesized Pt(IV) complexes were investigated analytically (elemental and thermogravimetric analyses), spectrally (infrared, UV–visible, mass, ¹H NMR, ¹³C NMR, X‐ray diffraction) as well as theoretically (kinetics, modeling and docking). The data extracted led to the establishment of the best chemical and structural forms. Octahedral geometry was the only formula proposed for all complexes, which is favorable for d⁶ systems. The molecular ion peaks from mass spectral analysis coincide with all analytical data, confirming the molecular formula proposed. X‐ray diffraction (XRD) and scanning electron microscopy (SEM) allowed discrimination of features between crystalline particles and other amorphous morphology. By applying Gaussian09 as well as HyperChem 8.2 programs, the best structural forms were obtained, as well as computed significant parameters. Computed parameters such as softness, hardness, surface area and reactivity led us towards application in two opposing pathways: tumor inhibition and oxidation activation. The catalytic oxidation for CO was conducted over PtO₂, which was yielded from calcination of the most reactive complex. The success of catalytic role for synthesized PtO₂ was due to its particulate size and surface morphology, which were estimated from XRD patterns and SEM images, respectively. The antitumor activity was tested versus HCT‐116 and HepG‐2 cell lines. Mild toxicity was recorded for two of the derivatives and their corresponding complexes. This degree of toxicity is more favorable in most cases, due to exclusion of serious side effects, which is coherently attached with known antitumor drugs.     

Biological and catalytic evaluation of Ru(II)‐p‐cymene complexes of Schiff base ligands: Impact of ligand appended moiety on photo‐induced DNA and protein cleavage,cytotoxicity and C‐H activation

Two organometallic Ru(II)‐p‐cymene complexes of the type [Ru(η⁶‐p‐cymene)(L)Cl]PF₆ 1 and 2 , where L is N,N‐bis(4‐isopropylbenzylidene)ethane‐1,2‐diamine (bien, L1 ) or N,N‐bis (pyren‐2‐ylmethylene)ethane‐1,2‐diamine (bpen, L2 ) have been prepared and characterized well. Because of appended pyrenyl groups in coordinated bpen ligand, the complex 2 exhibits higher DNA and protein binding than complex 1 in which isopropylbenzyl groups are incorporated. Interestingly, the luminescent characteristic complex 2 is unique in displaying DNA cleavage after light activation by UVA light at 365 nm through oxygen dependent mechanism. AFM analysis attests the photo‐induced DNA fragmentation ability of complex 2 . Also, the complex 2 cleaves the protein after light exposure in a non‐specific manner suggesting that it can act as a protein photo cleaving agent. In contrast to the trend of DNA and protein interaction of complexes, the complex 1 exhibits cytotoxic activity against human breast carcinoma ( MCF‐7 ) and liver carcinoma ( HepG2 ) with potency higher than that of complex 2 due to enhanced hydrophobicity of isopropyl groups present in p‐cymene and bien ligands. Indeed, complex 2 is inactive against MCF‐7 and HepG2 cancer cell lines even up to 200 μM concentration. The AO/EB staining assay reveals that the complex 1 is able to induce late apoptotic mode of cell death in breast cancer cells, which is further confirmed by inter‐nucleosomal DNA cleavage. Furthermore, the complexes 1 and 2 are evaluated for their catalytic activities and found to be working well for the β‐carboline directed C–H arylation to afford the desired products in good yield (40–47%).